195
EN
Menu functions (Custom menus)
4
5
Choose a shutter speed while viewing the display.
• Choose a shutter speed using the front or rear dial or the FG buttons.
• Continue adjusting shutter speed until banding is no longer visible in the display.
• Press the INFO button; the display will change and the
P
icon will no longer
be displayed. You can adjust aperture and exposure compensation. Do so using the
front or rear dial or the arrow pad.
• Press the INFO button repeatedly to return to the fl icker scan display.
6
Take pictures once settings have been adjusted to your satisfaction.
• Focus peaking, the LV super control panel, and live controls are not available in the fl icker
scan display. To view these items, fi rst press the INFO button to exit the fl icker scan
display.
%
• [K Flicker Scan] can be assigned to a button. You then need only press the button to
enable fl icker scan. g [K Button Function] (P. 107)
Shutter speeds when the fl ash fi res (#X-Sync./#Slow Limit)
MENU G W [#X-Sync.]/[#Slow Limit]
You can set shutter speed conditions for when the fl ash fi res.
Shooting
mode
Flash fi ring shutter speed Upper limit Lower limit
P
The camera automatically sets the
shutter speed.
[#X-Sync.]
setting
[#Slow Limit]
setting*
A
S
The set shutter speed No lower limit
M
* Extends up to 60 seconds when slow synchronization is set.