188
EN
Menu functions (Custom menus)
4
Adding information displays (G/Info Settings)
MENU G P [G/Info Settings]
q Info (Playback information displays)
Use [q Info] to add the following playback information displays. The added displays are
displayed by repeatedly pressing the INFO button during playback. You can also choose to
not show displays that appear at the default setting.
15
Shadow
Highlight
15
1615
1x
Histogram display Highlight & Shadow
display
Light box display
Highlight & Shadow display
Areas above the upper limit of brightness for the image are shown in red, those below the
lower limit in blue. g [Histogram Settings] (P. 168)
Light box display
Compare two images side-by-side. Press the Q button to select the base image.
• The base image is displayed on the right. Use the front dial to select an image and press
the Q to move the image to the left. The image to be compared to the image on the left
can be selected on the right. To choose a different base image, highlight the right frame
and press the Q.
• To change the zoom ratio, turn the rear dial. Press the ISO button and then FGHI to
scroll the zoomed-in area, and rotate the front dial to select between images.
2x 2x
53 54
2x
ISO
ISO
ISO
qa Info (Magnifi ed playback information display)
The magnifi ed playback information displays can be set with [qa Info]. If [a] (Magnify)
is assigned to a button with Button Function (P. 107) in advance, the set displays can be
switched by repeatedly pressing the a button during playback. You can also choose to not
show displays that appear at the default setting.
aaa
a
2019.12.01 12:30:00
L
F
100-0020
20 20
2x
2x 2x
20
To Next Page
Loading...
Need help?
General
Weight and Dimensions
