7 Using an SNMP/Web card
7-2 SNMP/Web card outline
BN50T/BN75T/BN100T/BN150T/BN220T/BN300T
7-2
Enhanced security functions
For HTTP and SNMP connections, access can be controlled for each IP.
Coordinated shutdown
Multiple UPS can coordinate with each other to perform shutdown.
Log function
The UPS power status, battery status, etc. can be stored in the built-in flash memory.
The log function supports SYSLOG.
Auto shutdown function
Shutdown is automatically performed when there is a power supply error or when a
shutdown has been scheduled. Scheduled operations (auto startup and auto shutdown)
can be performed over the network.
Equipped with UPS standard MIB (RFC1628) and proprietary MIB (swc mib)
Using JAVA applet to monitor the power supply status
The power supply status can be visually checked on a graph display.
7-2-2 Specifications
Item Contents
LAN port 10/100 Mbps
Network protocol SNMP, HTTP, APR, RARP, TFTP, ICMP
Other communication route Serial connection: asynchronous method (setting
only)
Number of controllable computers 32 max. (including slave UPS when coordinated
shutdown is enabled)
Support MIB UPSMIB (RFC1628)
OMRON MIB
Operating temperature/humidity 0 to 40°C/25 to 85%
* Note that the range of the operating tempera-
ture/humidity differs from that of BN-T.
Other Equipped with real-time lock
For more details, refer to the instruction manual included with the SNMP/Web card.
The most recent firmware can be downloaded from our homepage
(http://www.omron.co.jp/ese/).
To Next Page
Loading...
Need help?
General
