Omron E5*C Series Communications Manual

6 Programless Communications
6 - 30
E5C-T Digital Temperature Controllers Programmable Type Communications Manual (H186)
The SP and RUN/RESET status of the E5@C-T Controllers will be changed to check operation. Make
sure that this will not create any problems in the controlled system.
 Checking E5CC-T Monitor Values
(1) The PLC operating mode must be changed to PROGRAM mode to enable changing
values in PLC memory.
Perform step 1 in Communications Settings for the Serial Communications Option Board in
6-4-3 PLC Setup to move to PROGRAM mode.
(2) Double-click Memory. The PLC Memory Window will be displayed.
(3) We will monitor memory in the PLC Memory Window.
Double-click D to select the DM Area in the left pane and then select Online
− Monitor
from the menu bar. The Monitor Memory Areas Dialog Box will be displayed. Click the Mon-
itor Button.
6-4-5 Checking Operation

Omron E5*C Series Specifications

General

Brand	Omron
Model	E5*C Series
Category	Controller
Language	English