Omron K3NX User Manual

22
Setting Mode
Section 3-2
Power On
Press the Mode and Shift Keys
while turning the K3NX on.
Maintenance Mode
Refer to Section 5 Useful Functions.
RUN Mode
Refer to Section 4 RUN Mode Operations.
Press the Escape and
Up Keys for 1 second.
Press the Mode
Key for 1 second.
Protect Mode
Refer 3-3 Protect Mode.
Setting Mode
Setting value menu
Press the Mode Key for 1 second.
HH setting value
H setting value
L setting value
LL setting value
Press the Mode Key for 1 second.
Scaling menu
Input value 2
Display value 2
Input value 1
Display value 1
Decimal position
–19999 to 99999
Output test
Refer to Section 5
Useful Functions.
Option menu
Average processing
Startup compensa-
tion time
Hysteresis
H linear output
range
L linear output
range
Comparative output
pattern
Note 2:
The K3NX stops measurement
in setting mode.
Some menus cannot be set ac-
cording to the Output Board se-
lected.
If the input range is changed, all
the other parameters are set to
default values. Therefore, set
the input range first.
Press the Mode Key for 1 second.
Press the Mode Key for 1 second.
Setup Menu
Input range
Power supply
frequency
Communications
unit number
Baud rate
Word length
Stop bits
Parity bits
Remote/Local pro-
cessing
3-2-2 Menu Overview
Press the Escape Key.
Press the
Escape Key.
Press the
Escape Key.
(see note 1)
Note 1:
When making new settings
or changing settings of each
parameter, press the Shift
Key to shift to the setting
state.
The input will be updated
automatically if no change is
made for five seconds.
AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr

Omron K3NX Specifications

General

Brand	Omron
Model	K3NX
Category	Measuring Instruments
Language	English