To Next Page

To Previous Page

Hysteresis

• The hysteresis can be set in the option menu to prevent “chattering” of the out-

put if the measured value fluctuates in the vicinity of the setting values.

• The hysteresis can be set within a range of 1 and 9999 digits for four consecu-

tive digits beginning with the leftmost digit regardless of the decimal point.

• The value set to 0 is regarded as 1.

• The decimal point position set in the scaling menu becomes valid.

Setting range Unit Default

1 to 9999

--- 1

If the comparative output is a level output, however, the hysteresis will be en-

abled when the measured value starts to become smaller than the HH, H, LL,

and L setting values.

Measured value

H setting value

L setting value

H comparative output

L comparative output

Hysteresis

This setting is only available for the K3NX with the Comparative Output Unit.

Follow the steps described below to set the hysteresis to 30.

Set Value LED Display Model Basic Model

1, 2, 3... 1. Press the Mode Key for more than one second while the opt option menu is

displayed. The aUg average processing setting will appear.

Set Value LED Display Model Basic Model

hys

FUNCTION

SETTING

REFERENCE

MODELS

SETTING

EXAMPLE

Setting Mode

Section 3-2

AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr

Omron K3NX User Manual

Other manuals for Omron K3NX