To Next Page

To Previous Page

Word Length

Stop Bits

Parity Bits

• The communications format used for communicating with the host computer is

set in the setup menu.

• Refer to the Communications Manual for the communications format in detail.

• Word Length

Setting Unit Default

7/8 bit 7

• Stop Bits

Setting Unit Default

1/2 bit 2

• Parity Bit

Setting Default

none: None

eUen: Even

odd: Odd

eUen

This setting is available for the K3NX with the Communications Output Board.

Follow the steps described below to set the following.

Word length: 8 bits

Number of stop bits: 1

Parity bits: none

Set Value LED Display Model Basic Model

1, 2, 3... 1. Press the Mode Key for more than one second while the setup setup menu

is displayed. The inĆt input range setting will appear.

Set Value LED Display Model Basic Model

len

sbit

prty

FUNCTION

SETTING

MODELS

SETTING

EXAMPLE

Setting Mode

Section 3-2

AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr

Omron K3NX User Manual

Other manuals for Omron K3NX