65
Security
• Settings in setting mode can be prohibited in the protect menu.
• The following table shows what set values for menus can be prohibited. The
default is 0.
Menu
Set value
0 1
2
Setting value Prohibited
Scaling Prohibited
Setup Prohibited Prohibited
Option Prohibited
• The value changes in the following order with the Up Key: 0, 1, 2, and 0
Follow the steps described below to set the security setting to 1.
Set Value LED Display Model Basic Model
1, 2, 3... 1. Press the Mode Key for more than one second while the prot protect menu
is displayed. The all all key protect setting will appear.
Set Value LED Display Model Basic Model
2. Repeatedly press the Mode Key until the secr security setting is displayed.
Set Value LED Display Model Basic Model
3. Press the Shift Key to display the prior set value 0 for changing. The PROG
indicator will flash.
Set Value LED Display Model Basic Model
secr
FUNCTION
SETTING
SETTING
EXAMPLE
Protect Mode
Section 3-3
AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr
To Next Page
Loading...
Need help?
General
