To Next Page

To Previous Page

Follow the steps described below to input the following.

Setting value HH = “8000”

Setting value H = “6000”

Setting value L = “4000”

Setting value LL = “2000”

Set Value LED Display Model Basic Model

1, 2, 3... 1. Press the Mode Key for more than one second while the sUset setting value

menu is displayed. The sU.hh HH setting value setting will be displayed.

Set Value LED Display Model Basic Model

2. Press the Shift Key to display the set value 199.99 for changing. The PROG

indicator will flash.

Set Value LED Display Model Basic Model

3. Press the Up and Shift Keys to set the value to 8000. The input will be vali-

dated automatically if no change is made for five seconds. The sU.hh HH set-

ting value setting will be displayed again.

Note Press the Mode Key to enter the set value immediately. The sU.h H

setting value setting will be displayed for setting the next parameter.

Set Value LED Display Model Basic Model

4. Press the Mode Key to display the sU.h H setting value setting.

Set Value LED Display Model Basic Model

5. Press the Shift Key to display the set value 199.99 for changing. The PROG

indicator will flash.

Set Value LED Display Model Basic Model

SETTING

EXAMPLE

Setting Mode

Section 3-2

AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr

Omron K3NX User Manual

Other manuals for Omron K3NX