Oracle DE2-24 User Manual

Restoring from a Saved Configuration (CLI)
3.
Confirm that it is okay to proceed after reviewing “Configuration Restore
Impact” on page 308.
Restoring from a Saved Configuration (CLI)
Use the following procedure to restore from a saved configuration.
Caution - Backing up a configuration on one appliance platform, then restoring that
configuration on a different appliance platform is unsupported. For more information, see
“Configuration Restore Impact” on page 308.
Before You Begin
Before restoring a saved appliance configuration, review the guidelines in “Configuration
Restore Impact” on page 308.
1.
To revert the system to a saved configuration, use the following CLI command.
You are prompted to enter the universal unique identifier for the backup.
hostname:maintenance system configs> restore
Restore. Select the configuration to restore:
hostname:maintenance system configs conf_restore step0>
set uuid=36756f96-b204-4911-8ed5-fefaf89cad6a
uuid = 36756f96-b204-4911-8ed5-fefaf89cad6a
2.
To execute the restore operation, use the following CLI command:
hostname:maintenance system configs conf_restore step0> done
Note - Storage pools are not automatically unconfigured when you execute the restore
command.
Deleting a Saved Configuration (BUI)
Use the following procedure to delete a saved configuration.
1.
Go to Maintenance > System.
2.
For the appropriate configuration, click the trash icon .
312 Oracle ZFS Storage Appliance Customer Service Manual • July 2016

Oracle DE2-24 Specifications

General

Brand	Oracle
Model	DE2-24
Category	Storage
Language	English