Upgrading Controller B (BUI)
Chassis:
NAME STATE MANUFACTURER MODEL SERIAL RPM
...
disk-000 HDD 0 ok SEAGATE ST330057SSUN300G 001117G1G929 6SJ1G929 15000
disk-001 HDD 1 ok SEAGATE ST330057SSUN300G 001117G1GA8Y 6SJ1GA8Y 15000
disk-002 HDD 2 ok SEAGATE ST330057SSUN300G 001117G1KDPZ 6SJ1KDPZ 15000
...
9.
Go to configuration storage show to verify that there are no pool errors.
The pool should be online and have no errors.
controller-a:> configuration storage show
Pools:
POOL OWNER DATA PROFILE LOG PROFILE STATUS ERRORS
-> pool25 brm7320-250 - - online 0
pool26 brm7320-260 - - online 0
Controller A is now upgraded.
Next Steps
■
Upgrading Controller B - CLI
Upgrading Controller B (BUI)
Use the following procedure to upgrade the second controller, controller B, of a clustered
appliance.
1.
Click the power icon in the upper left section of the masthead.
2.
In the Power dialog box, select Reboot from the drop-down menu, and then click
OK.
3.
After the reboot completes, log in to controller A and go to Configuration >
Cluster to verify that controller B is in the passive state.
For information about the clustered states, see “Cluster Takeover and Failback” in Oracle ZFS
Storage Appliance Administration Guide, Release OS8.6.0.
4.
Log back in to contoller B, go to Maintenance > System, and click the arrow icon
next to the desired system update.
Upgrading the Software 333
To Next Page
Loading...
Need help?
General