Orion OLM-5510 User Manual

- When you install MLCD, make sure there is at least 20cm clearance for effective
ventilation and do not seal off MLCD sets.
If MLCD sets are installed at the locations of bad ventilation, the inner temperature
can be raised rapidly and it can cause frequent malfunctions and rapid reduction
of the product life.
※ Ventilation space in front of MLCD must be furnished for heat dispersion.If the
front space of MLCD has to be sealed, there must be consideration for the heat
dispersion in the rear side of MLCD.
- Carefully install MLCD not to cover the fan air holes with any structural object.
If the holes are covered with anything, the inner temperature can be raised
rapidly and it can cause malfunctions.

- Regularly clean off the vent holes in the back of MLCD sets.
If the vent holes and the fan air holes are clogged with dust, it prevents the air ow
inside of MLCD sets.
It can cause rapid increase of the inner temperature and may cause malfunctions.
Clean off the vent holes and the fan air holes with a vacuum cleaner regularly.
※ Clearance for Ventilation ※ Do not cover the vent hole for the fan
※ Cleaning and Maintenance
Installation structure
FAN STBPWR ON
VIDEO
IN OUT
DVI-D
IN OUT
RS-232C
IN OUT
PC
IN OUT
LAN
SVC
ID SELECT
CO., LTD.
Made in Korea
To prevent electric shock, Do not remove cover.
No user serviceable part inside Refer servicing
to qualified service personal.
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION
• Model Name : OLM-4610
• Voltage : AC~100 - 240V
• Current : Max. 3A
• Frequency : 50/60Hz
• Serial No :
MLCD
FAN
Vacuum Cleaner
- 6 - - 7 -
ORION
Innitely Expandable
WARNING
WARNING
MLCD

Orion OLM-5510 Specifications

General

Brand	Orion
Model	OLM-5510
Category	Monitor
Language	English