Outback Power Systems FLEXMAX 80 User Manual

54
PB
CLEAR LOG
BACK TOTL DAILY
Are you sure?
NO YES
Today 0000Ah 00.0 KWH
011Vp 00.0Ap 0.00kWp
MAX 14.7V ABS 01:00
MIN 14.6V FLT 00:00
Today 0000Ah 00.0 KWH
011Vp 00.0Ap 0.00kWp
MAX 14.7V ABS 01:00
MIN 14.6V FLT 00:00
A user can clear either the daily or accumulated statistics
of the FLEXmax 80 by pressing the second button from
the left in this screen. This will bring up the CLEAR LOG
screen.
The CLEAR LOG screen oers the option of clearing up
to 128 days of accumulated statistics or the total in the
secondary STATS screen (page 55). Press and hold either
the <TOTL> (total) or <DAILY >key to clear those specic
statistics.
The Are you sure? screen appears. Pressing the <YES> soft
key returns to the CLEAR LOG screen; pressing the <NO>
soft key returns to the Logging screen.
Pressing the third and fourth soft keys changes the
displayed day’s statistics, by moving either forward or
backward within the 128 days of available statistics that
are viewable.
NOTE: If two or more FLEXmax 80s are used in the same
system and are started up or cleared on dierent days,
their numeric dates will not be the same. This can lead
to some misunderstandings when looking back and
comparing data between the two or more units. A user
looking back at day 12 on both units would nd very
dierent results.
15. Logging

Outback Power Systems FLEXMAX 80 Specifications

General

Brand	Outback Power Systems
Model	FLEXMAX 80
Category	Controller
Language	English