Panasonic KX-NCP500 User Manual

1.8.12 Using Your PS in Parallel with a Wired Telephone (Wireless
XDP Parallel Mode)
Your PS can be used in parallel with a PT or SLT.
When in this mode, incoming calls to a wired telephone also ring the paired PS.
To set
PS
Enter extension number
of the paired telephone.
Press CANCEL.
PS
phone no.extension no.
Press TALK.
Enter 48.
4 8 1
C.Tone
Enter 1.
To cancel
PSPS
Press CANCEL.
Press TALK.
Enter 48.
4 8 0
C.Tone
Enter 0.
• Some wired telephones are prohibited from using this feature.
• If you go off
-hook while your parallelled telephone is in use, the call will switch over to
you.
142 User Manual
1.8.12 Using Your PS in Parallel with a Wired Telephone (Wireless XDP Parallel Mode)

Panasonic KX-NCP500 Specifications

General

VoIP Support	Yes
Operating System	Proprietary
Type	Hybrid IP-PBX
VoIP Codecs	G.711, G.729A
Protocols	SIP, H.323
Operating Temperature	0°C to 40°C
Analog Extensions	Yes
IP Extensions	Yes
Power Supply	AC 100-240 V, 50/60 Hz
SIP Trunks	Yes
Wireless (DECT) Extensions	Yes, with optional module
Weight	4.0 kg
Humidity	20% to 80% (non-condensing)