1.15 Using a KX-HGT100 SIP Extension
1.15.1 Operation List
To access PBX features, the access numbers (extension numbers or feature numbers) are required.
KX-HGT100 (firmware version 2.00
or later) users can use the following features:
Note
• To
execute an operation, you must press the OK button after pressing all the buttons of the operation.
• If these feature numbers do not work properly with the KX-HGT100, ensure that the firmware of the
KX-HGT100 and the MPR software file version of the PBX are upgraded to their latest versions. For
details, consult your dealer.
Features Refer to
Intercom Call 1.2.1 Basic Calling
Calling Another Extension
Operator Call 1.2.1 Basic Calling
To call an operator (Operator Call)
Automatic Line Access 1.2.1 Basic Calling
To select an idle outside line automatically
(Automatic Line
Access)
Outside Line Group Access 1.2.1 Basic Calling
To select an idle outside line in the specified outside line group
automatically (Outside Line Group Access)
TIE Line Access 1.2.1 Basic Calling
Making a Call to a Private Network (TIE Line Access)
Redial 1.2.3 Redial
Redialling the Last Number You Dialled (Last Number
Redial)
Speed Dialling—System/Personal 1.2.2 Easy Dialling
–
Using Numbers Stored in the PBX (System Speed
Dialling)
–
Using Numbers Stored at Your Extension (Personal
Speed Dialling)
Personal Speed
Dialling
—Programming
1.2.2 Easy Dialling
Using Numbers Stored at Your Extension (Personal Speed
Dialling)
Doorphone Call 1.10.1 If a Doorphone/Door Opener is Connected
External BGM On/Off 2.1.4 Turning on the External Background Music (BGM)
S-CO Line Access 1.2.1 Basic Calling
To select the specified outside line
Account Code Entry 1.2.1 Basic Calling
Using an Account Code (Account Code Entry)
188 User Manual
1.15.1 Operation List
To Next Page
Loading...
Need help?
General
