Panasonic KX-NCP500 User Manual

1.9 Utilising the Call Centre
1.9.1 Leaving an Incoming Call Distribution Group
(Log-in/
Log-out, Wrap-up)
You can control your status in an incoming call distribution
group. When in the Log-
out mode, incoming calls to the
group will not ring at your extension. When you return, calls
will again ring at your extension. (Default: Log-in) Even if
your extension is logged-in, you can have a specified time
period (wrap-up time) when you will not receive calls after
completing a previous call. This time can be used for you
to write a report and so on.
You can also manually select "Not Ready" mode to
temporarily leave a distribution group.
Log-in
Log-out
Wrap-up
Talk.
Not Ready
Ready
To set Log-in/Log-out
Off-hook.
On-hook.
PT/SLT/PS/SIP Extn.
Enter 736.
Log-out
Log-in
0
1
OR
Enter ICD Group extension
number or .
Specified
OR
ICD Group
extension no.
All
3 67
Enter 0 or 1.
C.Tone
ICD Group: Incoming Call Distribution Group
144 User Manual
1.9.1 Leaving an Incoming Call Distribution Group (Log-in/Log-out, Wrap-up)

Panasonic KX-NCP500 Specifications

General

VoIP Support	Yes
Operating System	Proprietary
Type	Hybrid IP-PBX
VoIP Codecs	G.711, G.729A
Protocols	SIP, H.323
Operating Temperature	0°C to 40°C
Analog Extensions	Yes
IP Extensions	Yes
Power Supply	AC 100-240 V, 50/60 Hz
SIP Trunks	Yes
Wireless (DECT) Extensions	Yes, with optional module
Weight	4.0 kg
Humidity	20% to 80% (non-condensing)