Panasonic KX-NCP500 User Manual

1.13 Using a Display Proprietary Telephone
1.13.1 Using the Call Log
This is available for display proprietary telephones and portable stations.
–
Calling with the Incoming Call Log
– Calling with the Outgoing Call Log
Calling with the Incoming Call Log
When you receive an outside call, an external sensor call or extension call
*1
, call information is recorded
automatically in the incoming call log. A preprogrammed number of calls can be logged per extension.
When the call log is full and other call arrives, the oldest call is deleted.
You can modify the logged telephone number.
When the Call Log button light turns on, there is a call which you did not answer.
The following information is logged.
• Caller’s Name
• Date/Time call received
• Answered or Not Answered
Confirmed or Not Confirmed
• Caller’s Phone Number
To confirm the log information with the Call Log button
Press Call Log until
desired party appears.
Display PT
(Call Log)
While on-hook
To confirm the log information with the Navigator Key
Press Left twice.
While on-hook
Press Up or Down until
desired party appears.
KX-NT300/KX-NT500/KX-DT300/KX-T7600/
KX-TCA185/KX-TCA285/KX-TCA385
174 User Manual
1.13.1 Using the Call Log

Panasonic KX-NCP500 Specifications

General

VoIP Support	Yes
Operating System	Proprietary
Type	Hybrid IP-PBX
VoIP Codecs	G.711, G.729A
Protocols	SIP, H.323
Operating Temperature	0°C to 40°C
Analog Extensions	Yes
IP Extensions	Yes
Power Supply	AC 100-240 V, 50/60 Hz
SIP Trunks	Yes
Wireless (DECT) Extensions	Yes, with optional module
Weight	4.0 kg
Humidity	20% to 80% (non-condensing)