Panasonic KX-NCP500 User Manual

1.2.6 Alternating the Calling Method (Alternate Calling—Ring/
Voice)
The caller can alternate the alerting method, either ring or
voice, when making an intercom call.
On the other hand, any extension can set the alerting
method,
either ring or voice, when receiving an intercom call.
Ringing (Default): You can call the other party with a ring
tone.
Voice-calling: You can talk to the other party immediately
after confirmation tone.
Ring
Ring
Hello
OR
To change the method
After dialling
Enter .
PT/SLT/PS
Talk.
C.Tone
• Voice-calling from a SIP Extension is not available.
• If
the called party uses a SIP Extension, single line telephone (SLT) or portable station (PS),
Voice-calling is not available.
• This feature is not available when the called party’s telephone is in the Voice Call Deny mode.
Customising Your Phone
• 3.1.2 Settings on the Programming Mode—Alternate Receiving—Ring/Voice
Select the alerting method, either ring or the other party
’s voice.
User Manual 45
1.2.6 Alternating the Calling Method (Alternate Calling—Ring/Voice)

Panasonic KX-NCP500 Specifications

General

VoIP Support	Yes
Operating System	Proprietary
Type	Hybrid IP-PBX
VoIP Codecs	G.711, G.729A
Protocols	SIP, H.323
Operating Temperature	0°C to 40°C
Analog Extensions	Yes
IP Extensions	Yes
Power Supply	AC 100-240 V, 50/60 Hz
SIP Trunks	Yes
Wireless (DECT) Extensions	Yes, with optional module
Weight	4.0 kg
Humidity	20% to 80% (non-condensing)