Panasonic KX-NCP500 User Manual

1.2.3 Redial
This is convenient when calling the same outside party again.
– Redialling the Last Number You Dialled (Last Number Redial)
Redialling the Last Number You Dialled (Last Number Redial)
PT/SLT/PS/SIP Extn.
Off-hook.
Press REDIAL or enter #.
OR
REDIAL
• Up to 32 digits can be stored and redialled.
• After pressing REDIAL, if you hear a busy tone again, press REDIAL to retry.
• If
you want to log outgoing intercom calls to the outgoing call log, consult your System Installer
or Administrator.
• If you have seized a trunk, pressing the REDIAL button will be ignored if the last number you
dialled was an extension.
• Automatic Redial
To
redial automatically, press the SP-PHONE button and then the REDIAL button, or press
the REDIAL button directly. It will keep trying the busy number until the called party answers
or until a specified timeout.
You can perform other tasks during dialling. To cancel, press the FLASH/RECALL button.
Some outside lines may not support this feature.
This feature is not available for the KX-T7665 and PS.
User Manual 35
1.2.3 Redial

Panasonic KX-NCP500 Specifications

General

VoIP Support	Yes
Operating System	Proprietary
Type	Hybrid IP-PBX
VoIP Codecs	G.711, G.729A
Protocols	SIP, H.323
Operating Temperature	0°C to 40°C
Analog Extensions	Yes
IP Extensions	Yes
Power Supply	AC 100-240 V, 50/60 Hz
SIP Trunks	Yes
Wireless (DECT) Extensions	Yes, with optional module
Weight	4.0 kg
Humidity	20% to 80% (non-condensing)