EV Charge Control Basic
16 / 68
PHOENIX CONTACT 106377_en_04
Operation in a clean and dry environment only
The degree of protection of the device is designed for an environment with a maximum pol-
lution degree of 2 according to IEC 60664-1.
If the device is to be used for an outdoor charging infrastructure, one option for achieving
pollution degree 2 in the microenvironment is to provide a housing with IP5X protection ac-
cording to IEC 60529.
Do not subject the device to any strain or load that exceeds the limits described.
3.2 Maintenance and disposal
Maintenance With the exception of configuration, opening or modifying the device is not permitted. Do not
repair the device yourself; replace it with an equivalent device instead. Repairs may only be
carried out by the manufacturer.
Stop For stopping, the device must be disconnected from the mains voltage. Only remove the de-
vice when disconnected from the voltage.
Provide a disconnecting device for disconnecting the charging station from the voltage.
Disposal Do not dispose of the device with household waste, it should instead be disposed of in ac-
cordance with the currently applicable national regulations. The device can also be returned
to Phoenix Contact.
Product Degree of protection
EV-CC-...-PCB IP00 according to IEC 60529
EV-CC-...-HS IP20 according to IEC 60529
To Next Page
Loading...
Need help?
General
