PIAGGIO NRG Power DT User Manual

1 DUST GUARDS
2 SEALING RINGS
3 PLUNGERS
4 O-RING GASKET
Refitting
•
Refit the pincer on the support and
tighten the screws at the prescribed
torque.
•
Refit the tube complete with fitting with
new copper gaskets.
•
Bleed the air from the system.
Locking torques (N*m)
Brake fluid tube calliper 20 ÷ 25 Nm Fastening
screws calliper to the crankcase 20 - 25 Oil
bleed screw 7 to 10 Nm
Front brake disc
Removal
- Remove the front wheel loosening the axle
clamp.
-Remove the six fastenings of the disc.
Refitting
-When refitting, position the disc correctly making sure that it rotates in the right direction.
Locking torques (N*m)
Disc tightening screw 8 - 12
NRG Power DT Braking system
BRAK SYS - 3

PIAGGIO NRG Power DT Specifications

General

Brand	PIAGGIO
Model	NRG Power DT
Category	Scooter
Language	English