PIAGGIO NRG Power DT User Manual

Name: PIAGGIO NRG Power DT
Brand: PIAGGIO
Rating: 4 (1 reviews)

171 pages

To Next Page

To Previous Page

Disc Inspection

Checking the disc is important; it must be perfectly

clean, with no sign of rust, oil or grease or other

dirt and must not show signs of deep scoring.

Characteristic

New rear disc thickness

4.0 mm

Disc thickness at wear limit (front)

3.5 mm

•

Using the appropriate tool, measure

how much the disc protrudes when the

wheel is fitted properly. The protrusion,

measured near the external edge of

the disc, must be less than 0.1 mm.

•

If a value is measured other than the

specified value, remove the front wheel

(Front/Rear Suspension chapter) and

check the protrusion of the disc. Maxi-

mum permissible out of true is 0.1 mm.

If the value measured is greater, re-

place the disc and repeat the check.

•

If the problem persists, check and re-

place the wheel hub if necessary.

Specific tooling

020335Y Magnetic support for dial gauge

Front brake pads

Braking system NRG Power DT

BRAK SYS - 4

Questions and Answers:

Need help?

Do you have a question about the PIAGGIO NRG Power DT and is the answer not in the manual?

General