Excessive steering play
EXCESSIVE STEERING CLEARANCE
Possible Cause Operation
EXCESSIVE STEERING CLEARANCE Check the tightening of the top and bottom ring
nuts.
If irregularities continue in turning the steering
even after making the above adjustments, check
the seats in which the ball bearings rotate: replace
if they are recessed.
Noisy suspension
NOISY SUSPENSION
Possible Cause Operation
Components of the front suspension damaged. Check the quiet operation in the compression or
release phases of the fork and if necessary over-
haul it. Check that there is no noise or seizing
during the wheel rotation; if there is, change the
wheel bearing.
Components of the rear suspension damaged. Check the absence of noise in the compression or
release of the suspension, if necessary check the
proper tightness to the swinging arm unit and the
absence of rust or replace the entire shock ab-
sorber. Check that there is no noise or seizing
during the wheel rotation; if there is noise or seiz-
ing overhaul the final reduction assembly.
Suspension oil leakage
OIL LEAKAGE FROM SUSPENSION
Possible Cause Operation
Shock absorbers malfunctioning Replace the complete shock absorption unit
Hydraulic cartridge in the fork damaged. Replace the hydraulic cartridge
NRG Power DT Troubleshooting
TROUBL - 7