PIAGGIO NRG Power DT User Manual

Sospensioni anteriore
This section is devoted to operations that can be carried out on the suspension.
Front
Removing the front wheel
- Support the vehicle in such a way that the front
wheel is raised.
- Using two 18 mm hexagonal wrenches remove
the front wheel axle.
Refitting the front wheel
- When refitting, pay attention in repositioning the odometer drive correctly.
Locking torques (N*m)
Wheel fixing nut 40 to 50 N.m
Handlebar
Removal
- Remove the front handlebar cover.
- Remove the rear handlebar cover.
- After removing the transmissions and discon-
necting the electrical terminals, remove the bolt
«A» and the handlebar
- Check all components and replace faulty parts.
N.B.
IF THE HANDLEBAR IS BEING REMOVED TO
REMOVE THE STEERING, TILT THE HANDLE-
BAR FORWARD TO AVOIDING DAMAGING
THE TRANSMISSIONS.
Suspensions NRG Power DT
SUSP - 2

PIAGGIO NRG Power DT Specifications

General

Brand	PIAGGIO
Model	NRG Power DT
Category	Scooter
Language	English