Setting up 08
35
En
English
Basic picture adjustments
Adjust the picture to your preference for the chosen AV Selection
option (except DYNAMIC).
1 Repeat steps 1 to 3 provided for
AV Selection
.
2 Select an item to be adjusted (
/
then ENTER).
If you select “OPTIMUM” for “AV Selection”, the following submenu
appears on screen.
For PC source, the following screen appears;
3 Select the desired level for AV Selection options other than
“OPTIMUM” (
/
).
When the bar is in display, you can also change the item to be
adjusted, by pressing /.
4 Press HOME MENU to exit the menu.
For AV source
For PC source
Note
• To perform advanced picture adjustments, select “Pro Adjust”
in step 2 and then press ENTER. For the subsequent procedures
see Advanced picture adjustments on page 36.
• To restore the factory defaults for all items, press / to select
“Reset” in step 2, and then press ENTER. A confirmation screen
appears. Press / to select “Yes”, and then press ENTER.
• You may experience a sudden change in the image position and
screen brightness when you open the “Picture” menu.
• Pressing TOOLS also causes the “AV Selection” menu to
appear.
• If you have selected “DYNAMIC”, you cannot select “Contrast”,
“Brightness”, “Colour”, “Tint”, “Sharpness”, “Pro Adjust”, and
“Reset”; these menu items are dimmed.
• Selecting “OPTIMUM” causes optional menus to appear:
“Sound Control” and “OPTIMUM Performance” (page 41).
AV Selection : STANDARD
Contrast : 40
Brightness : 0
Colour : 0
Tint : 0
Sharpness : 0
Pro Adjust
Reset
Picture
AV Selection : OPTIMUM
PureCinema
Sound Control : Off
OPTIMUM Performance
Reset
Picture
AV Selection : STANDARD
Contrast : 40
Brightness : 0
Red : 0
Green : 0
Blue : 0
Reset
Picture
Item button button
Contrast For less contrast For more contrast
Brightness For less brightness For more brightness
Colour For less colour intensity For more colour
intensity
Tint Skin tones become
purplish
Skin tones become
greenish
Sharpness For less sharpness For more sharpness
Item button button
Contrast For less contrast For more contrast
Brightness For less brightness For more brightness
Red For weaker red For stronger red
Green For weaker green For stronger green
Blue For weaker blue For stronger blue
PDP-LX609H.book Page 35 Wednesday, August 6, 2008 4:00 PM
Downloaded From TV-Manual.com Manuals