Polaris 650 MATRYX INDY XC 137 2021 User Manual

8
9850064 R03 - 2021 650 / 850 Matryx Trail Performance / Crossover Snowmobile Service Manual
© Copyright Polaris Inc.
8.15
STEERING / FRONT SUSPENSION SERVICE
STEERING POST SERVICE
STEERING POST REMOVAL
1. Remove the side panels and hood.
2. Remove the air intake plenum. See Air Intake Plenum
Removal page 3.140.
3. Remove the resonator and pipe. See Exhaust
Removal page 3.152.
4. Remove the fasteners
q
and lower handlebar
clamps
w
and carefully move the handlebar / controls
as an assembly away from the upper steering post.
NOTICE
The throttle cable, handlebar wiring harness, and brake
line will remain connected.
5. Remove the flange nut
e
securing the lower steering
post to the fixed link
r
. Discard the flange nut.
6. Remove the two fasteners
t
securing the lower
steering post clamp to the steering post mount.
7. Remove the upper steering post block fasteners
y
,
strap
u
, and flange nuts
i
. Discard the flange nuts.
8. Remove the steering post
o
from the vehicle.
STEERING / SUSPENSIONS

Polaris 650 MATRYX INDY XC 137 2021 Specifications

General

Brand	Polaris
Model	650 MATRYX INDY XC 137 2021
Category	Snowmobiles
Language	English