8.42
9850064 R03 - 2021 650 / 850 Matryx Trail Performance / Crossover Snowmobile Service Manual
© Copyright Polaris Inc.
REAR TRACK SHOCK (RTS) SERVICE
REAR TRACK SHOCK (RTS) REMOVAL
1. Raise the rear of the snowmobile off of the ground
using a dedicated track stand or similar device.
2. Remove the fasteners securing the shock to the rear
torque arm.
3. Remove the fasteners securing the shock to the lower
mount.
REAR TRACK SHOCK (RTS) INSTALLATION
Installation of the rear track shock (RTS) onto the
snowmobile is the reverse of removal. Use new lock nuts
when installing the shock.
Torque fasteners to specifications.
TORQUE
Rear Track Shock Fasteners:
33 ft-lbs (45 N·m)
STEERING / SUSPENSIONS
To Next Page
Loading...
Need help?
General
