Polaris 850 PRO-RMK 163 3.0" QD 2021 User Manual

7.28
9850060 R02 - 2020-2021 850 AXYS™ Long Track Snowmobile Service Manual
© Copyright Polaris Inc.
DRIVEN CLUTCH INSTALLATION
1. Verify the same number of offset washers / bushings
are installed on the jackshaft that were present when
the clutch was removed.
2. Apply a light film of Polaris Premium Grease to the
jackshaft splines and shaft.
3. Install the driven clutch.
4. Install spacer
q
, float washers
w
and
e
, flat washer
r
, and driven clutch bolt
t
.
5. Torque bolt to specification.
TORQUE
Driven Clutch Bolt:
18 ft-lbs (25 Nm)
PVT SYSTEM

Polaris 850 PRO-RMK 163 3.0" QD 2021 Specifications

General

Brand	Polaris
Model	850 PRO-RMK 163 3.0" QD 2021
Category	Snowmobiles
Language	English