EasyManuals Logo
Home>Polaris>Utility Vehicle>GEM eLXD

Polaris GEM eLXD User Manual

Polaris GEM eLXD
174 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
SUSPENSION AND STEERING 2 - 3
November 2007 GEM Service Manual
SUSPENSION AND STEERING DIAGNOSIS AND TESTING
Condition Possible Causes Correction
Front end noise
Loose or worn wheel bearing
Loose or worn steering or suspension
components
Replace front knuckle assembly
Tighten or replace components as
necessary
Excessive play in
steering
Loose or worn wheel bearing
Loose or worn steering or suspension
components
Loose or worn steering gear
Replace front knuckle assembly
Tighten or replace components as
necessary
Tighten or replace steering gear
Front wheels
shimmy
Loose or worn wheel bearing
Loose or worn steering or suspension
components
Tires worn or out of balance
Replace front knuckle assembly
Tighten or replace components as
necessary
Replace or balance tires
Vehicle instability
Loose or worn wheel bearing
Loose or worn steering or suspension
components
Tire pressure
Alignment
Replace front knuckle assembly or rear
drum brake assembly
Tighten or replace components as
necessary.
Adjust tire pressure
Align vehicle to specifications
Excessive
steering effort
Loose or worn steering gear
Steering column u-joints binding
Tire pressure
Alignment
Replace steering gear
Replace steering column
Adjust tire pressure
Align vehicle to specifications
Vehicle pulls to
one side
Tire pressure
Tire
Worn wheel bearings
Loose or worn ball joints
Weak or broken spring/shock absorber
assembly
Adjust tire pressure
Rotate front tires side to side
Replace front knuckle assembly
Replace ball joints as necessary
Replace spring/shock/absorber
Check for proper front end alignment
Vehicle pulls to
one side while
braking
Brakes worn or out of adjustment
Air in brake lines
Loose or worn steering or suspension
components
Worn wheel bearings
Wheel cylinder leaking (rear only)
Adjust or replace brake components
Bleed brakes
Tighten or replace components as
necessary
Replace front knuckle assembly
Replace wheel cylinder
Excessive tire
wear at center of
tire
Toe out of specification
Tires over-inflated
Reset toe to proper specification
Release park brake or adjust park brake
cable tension
Repair or replace brakes
Vehicle cannot
reach top speed
Toe out of specification
Park brake on or cables tensioned too
tight
Brakes binding
Reset toe to proper specification
Release park brake or adjust park brake
cable tension
Repair or replace brakes
Vehicle will not
coast
Toe out of specification
Park brake on or cables tensioned too
tight
Brakes binding
Reset toe to proper specification
Release park brake or adjust park brake
cable tension
Repair or replace brakes
Vehicle makes
thumping sound
on tight turns
Toe out of specification.
CV boot cut or torn.
Reset toe to proper specification
Replace CV boot

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris GEM eLXD and is the answer not in the manual?

Polaris GEM eLXD Specifications

General IconGeneral
BrandPolaris
ModelGEM eLXD
CategoryUtility Vehicle
LanguageEnglish

Related product manuals