Polaris GEM eLXD User Manual

BODY 7 - 8
INSTALLATION OF SCUFF GUARDS (CONTINUED)
7. Mark the hole location
• Measure ½ inch from the seam of the panel
to get your front hole location.
• Drill out the hole to accommodate the bolt.
8. Locating the scuff guard
• Insert the front bolt to locate the scuff guard.
9. Finishing the scuff guard
1. Drill out the remaining two boltholes.
• Insert the bolts.
• Tighten the fasteners just tight enough to
not deform the scuff guards.
November 2007 GEM Service Manual

Polaris GEM eLXD Specifications

General

Brand	Polaris
Model	GEM eLXD
Category	Utility Vehicle
Language	English