Networks
2 - 9
Integration with Microsoft Live Communications Server (LCS)
Integration with Microsoft LCS allows you to set up a list of LCS contacts, see
if the contacts are online, and call them without knowing or remembering their
addresses. Contacts appear in the directory and can also be displayed on the
home screen. For more information about the contact list home screen, refer to
Displaying Contacts on the Home Screen on page 7-5.
To configure a Polycom HDX system
for use with Microsoft LCS:
1. Contact the LCS administrator to make sure that the Polycom HDX
system has a user account on the LCS server. Make a note of the account
information.
2. Go to System > Admin Settings > Network > Call Preference.
3. Enable SIP.
4. Go to System > Admin Settings > Network > IP > SIP Settings.
5. Configure these settings:
To view the status of the current LCS registration, do one of the following:
¾ Go to System > Admin Settings > Global Services > Directory Servers >
Microsoft.
¾ Select the Microsoft LCS server icon at the top of the Directory screen.
Adding and Removing Microsoft LCS Contacts
To add or remove LCS contacts for the Polycom HDX system:
1. Open the Microsoft Office Communicator or Windows® Messenger
application on a computer.
2. Log in to the application using the account information from the SIP
Settings screen of the Polycom HDX system.
3. Use the application to add or remove contacts for the Polycom HDX
system.
Setting Description
User Name Specifies the user name created for your Polycom HDX
system with the LCS server.
Password Specifies the password for this user name.
Registrar Server Specifies the location (IP or DNS) of the LCS server.
Proxy Server Specifies the location (IP or DNS) of the LCS server.
To Next Page
Loading...
Need help?
General
