Polycom HDX Series User Manual

User’s Guide for Polycom HDX Room Systems
© Polycom, Inc. 5
Calling from the Sites or Speed Dial List
You may be able to access calling information for specific sites using the Speed
Dial or Sites list on the Place a Call screen.
To place a call using the Speed Dial or Sites list:
1. Select Speed Dial or Sites from the Place a Call screen, if necessary.
2. Highlight the entry you want to call.
3. Press Call to place the call.
Calling from the Directory
The directory is a list of sites stored locally on the Polycom HDX system. If the
system is registered with a global directory, the directory also includes entries
from the global directory.
To place a call from the directory:
1. Press Directory on the remote control.
2. Highlight the entry to call.
3. Press
Call to place the call.
Ending a Video Call
To hang up from a call:
1. Press Hang Up on the remote control.
2. If prompted, confirm that you want to disconnect from the far site(s).
Depending on your system configuration, when you make a call using an entry with
both ISDN and IP dialing information, the system may prompt you to choose which
way to place the call.
If you don’t confirm that you want to hang up, the system disconnects the call
automatically after 60 seconds.

Polycom HDX Series Specifications

General

Brand	Polycom
Model	HDX Series
Category	Conference System
Language	English