Polycom SoundStructure C8 User Manual

Design Guide for the Polycom SoundStructure C16, C12, C8, and SR12
12 - 54
<APPLICATION APP_FILE_PATH="sip.ld" CONFIG_FILES="" MISC_FILES=""
LOG_FILE_DIRECTORY="" OVERRIDES_DIRECTORY="" CONTACTS_DIRECTORY=""
LICENSE_DIRECTORY="" USER_PROFILES_DIRECTORY=""
CALL_LISTS_DIRECTORY="">
To select a particular version of software to load to a particular
SoundStructure VoIP Interface, create a configuration file with a name
<MAC Address>.cfg where <MAC Address> is the MAC address of the
SoundStructure VoIP Interface (for example, 0004F2BF001D.cfg). In this
file, specify the exact name of the software file to load with file contents of:
<APPLICATION APP_FILE_PATH="my_version_sip.ld"
CONFIG_FILES="sip-basic.cfg" MISC_FILES="" LOG_FILE_DIRECTORY=""
OVERRIDES_DIRECTORY="" CONTACTS_DIRECTORY="" LICENSE_DIRECTORY="">
</APPLICATION>
where my_version_sip.ld is the name of the target software filename.
4. Reboot the SoundStructure VoIP Interface to force the system to check the
FTP site and load new software. The boot up process will take longer than
usual as the software is loaded and installed.
The SoundStructure VoIP Interface may be rebooted either by the Web
Configuration utility under Utilities > Reboot phone or from the
SoundStructure Studio Console by typing the command
set voip_reboot “VoIP Out”
which will cause the voip_reboot acknowledgment to be sent from the
SoundStructure system:
val voip_reboot “VoIP Out”
where “VoIP Out” is the name of the output channel of the interface to
reboot. If you have named your channel something else, use the name you
have selected.
5. Once the SoundStructure VoIP Interface has finished booting (solid green
light on the VoIP status LED), check that the software version has been on
updated by confirming the version number on the SoundStructure Studio
wiring as shown below.

Polycom SoundStructure C8 Specifications

General

Brand	Polycom
Model	SoundStructure C8
Category	Conference System
Language	English