Proceq Equotip Piccolo 2 User Manual

© 2016 by Proceq SA 3
9. Part Numbers and Accessories 20
10. Maintenance and Support 21
10.1. Regular Device Checks 21
10.2. Firmware Update 21
10.3. Cleaning 21
10.4. Storage 21
10.5. Updating the Equotip Piccolo 2 / Bambino 2 Device Firmware 21
11. Troubleshooting 22
11.1. Battery 22
11.2. Empty Display 22
11.3. Reset 22
11.4. Incorrect Measurements or failed Performance Check 23
11.5. Error Messages 23
Piccolink Software (only for Piccolo 2) 24
1. Safety and Liability 24
1.1. Safety and Usage Precautions 24
1.2. Liability and the “Software License Agreement” 24
2. Installing the Piccolink Software 24
2.1. Installing Piccolink 24
2.2. Installing the USB Driver 25
2.3. Establishing Connection between Device and Computer 25
3. Using the Piccolink Software 26
3.1. Application Examples 26
3.2. Launching Piccolink 26
3.3. Editing Data 27
3.4. Deleting Data 27
3.5. Exporting Data 27
3.6. Remote Control 27
3.7. Lock device 28
3.8. Exit Software and Connection 28
4. Device Settings 29
4.1. Impact Counters 29
4.2. Fixed Number of Impacts 29
4.3. Custom Conversion Curves 29
4.4. Shore Conversion Standard 30
4.5. Impact body D / DL 30
5. Troubleshooting 31
5.1. Uninstall default Drivers to install supplied USB Drivers 31
5.2. Disconnection of the Data Connection 31
5.3. Support 31
5.4. System Requirements 31

Proceq Equotip Piccolo 2 Specifications

General

Brand	Proceq
Model	Equotip Piccolo 2
Category	Test Equipment
Language	English