5–Preboot Adapter Configuration
NIC Partitioning Configuration
47 BC0154503-00 C
Partition N Maximum TX Bandwidth is the maximum transmit
bandwidth of the selected partition expressed as a percentage of the
maximum physical port link speed. Values can be 1–100. The per
partition maximum TX bandwidth value applies regardless of the
DCBX ETS mode setting. If the maximum TX bandwidth for a partition
is set to 0, the effective bandwidth is one percent.
Type a value in each selected field, and then click Back.
4. When prompted, click Yes to save the changes. Changes will take effect
after a system reset.
Figure 5-4 shows the partition configuration details.
Figure 5-4. Partition Configuration Details
To Next Page
Loading...
Need help?
General
