Preferences
The system optionally can share statistics for online reporting. In case the system is not
connected to internet or the server can’t be reached, the statistics are temporary stored on
the system. If the storage is full a warning message can be raised that statistic information
will be discarded and will not be available for the online reports. To enable the storage
usage warnings proceed as follows:
Open the supervisor settings menu.1.
2. Tap the [Connectivity] tab.
3. Tap [Preferences] and set "Enable storage usage warnings" to "On".
AIMS settings
When operating with AIMS Verification, the server address and port can be configured and
the connection to the AIMS server can be tested.
Contact your local distributor for more information about the AIMS option.
106
| Page 106 | Jul-11-2022 07:45 | Connect the System to the Internet
7
English
To Next Page
Loading...
Need help?
General
