Operator Maintenance9
Maintenance Schedule
Disconnect the mains power supply before performing any
maintenance.
The user must not attempt to service the appliance beyond that
described in this operator manual. All other servicing must be carried
out by qualified service personnel only.
Please contact your authorized distributor.
MaintenanceMaintenance
frequency
Daily • Check the system functions.
• Keep the system in proper condition by removing dust, paper re-
mains, etc.
The machine is delivered with an extra set of brushes.
To always have one clean set available, it is recommended to soak one
set in water and use the other set.
Weekly
• When dirty or saturated, clean the brushes of the envelope sealing
or replace them (see Clean and replace brushes on page 125).
• When dirty or saturated, clean the moistening cloth or replace if
necessary (see Replace moistening cloth on page 126).
• Clean feed and insert rollers as instructed by the Service Engineer.
When the display warns about dusty sensors, clean the applicable
sensors. After cleaning, always calibrate the photocells (see Calibrate
photocells on page 127).
When neces-
sary
124
| Page 124 | Jul-11-2022 07:45 | Operator Maintenance
9
English
To Next Page
Loading...
Need help?
General
