Clean and Replace Brushes
When dirty or saturated, clean the brushes of the envelope sealing or replace them as
follows:
Moisten the new brushes in water.1.
2. Unlock lever A of the upper unit and pull up the upper unit.
3. Remove the brushes one by one by pulling them down from the brush holder.
4. Replace the brushes. Make sure that the studs on the brushes are fitted in the
corresponding holes in the brush holder.
9
English
125
| Page 125 | Jul-11-2022 07:45 | Operator Maintenance
To Next Page
Loading...
Need help?
General
