Chapter 3: Connecting Hosts
Connect the Chassis to Hosts
QX and QXS Setup Guide 105
Figure99:Connecting hosts: Switch attach: four servers/multiple switches/SAN fabric
iSCSI Considerations
This section provides information as follows:
l QXS-312 and QXS-324 iSCSI Considerations below
l QXS-412, QXS-424, QXS-448, QXS-456, QXS-648, and QXS-656 iSCSI Considerations on the next
page
QXS-312 and QXS-324 iSCSI Considerations
When installing a QXS-312 or QXS-324 iSCSI RAID chassis, use at least three ports per server—two for
the storage LAN, and one of more for the public LAN(s)—to ensure that the storage network is isolated from
the other networks. The storage LAN is the network connecting the servers—via switch attach—to the
RAID chassis.
IPaddressschemeforthecontrollerpair—twoiSCSIportspercontroller
To Next Page
Loading...
Need help?
General