Quantum QX Series User Manual

Chapter 1: Components
2U12, 2U24, and 2U48 RAID Chassis: Rear Panel Layout
QX and QXS Setup Guide 19
1. HDMini-SASPorts(usedforhostconnection)
2. CLIPort(USB-TypeB)
3. ServicePort2(usedbyservicepersonnelonly)
4. ReservedforFutureUse
5. NetworkPort
6. ServicePort1(usedbyservicepersonnelonly)
7. DisabledButton(usedbyengineeringonly)
(Stickershowncoveringtheopening)
8. Mini-SASExpansionPort
2U12, 2U24, and 2U48 Expansion Chassis – Rear Panel
Components
The 2U12, 2U24, and 2U48 RAID Chassis support attachment to the 2U12, 2U24, and 2U48 Expansion
chassis. The rear of the Q2U12, 2U24, and 2U48 Expansion chassis all look the same. The expansion
chassis uses mini-SAS (SFF-8088) connectors to facilitate backend SAS expansion.
Note:The rear panel view is common to all three expansion chassis, with the exception that 2U48
PSUs are configured with a power switch; the 2U12 and 2U24 PSUs have no power switch.
Figure25:2U12, 2U24, and 2U48 Expansion Chassis – Rear Panel Components
LINKLINK
SERVICE
IN OUT
LINKLINK
SERVICE
IN OUT
1 1
2
3
1. PowerSupplies(ACshown)
2. ExpansionI/OModuleA
3. ExpansionI/OModuleB
Figure26:Expansion I/O Module
LINKLINK
SERVICE
IN OUT
1
2
3
4

Quantum QX Series Specifications

General

Brand	Quantum
Model	QX Series
Category	Storage
Language	English