Quantum QX Series User Manual

Chapter 8: Electrostatic
Discharge
This chapter contains the following topics:
About Electrostatic Discharge 196
Grounding Methods to Prevent ESD 197
About Electrostatic Discharge
To prevent ESD from damaging the system, be aware of the precautions to consider when setting up the
system or handling parts. A discharge of static electricity from a finger or other conductor may damage
system boards or other static-sensitive devices. This type of damage may reduce the life expectancy of the
device.
Caution:Parts can be damaged by ESD. Follow these precautions:
l Avoid hand contact by transporting and storing products in static-safe containers.
l Keep electrostatic-sensitive parts in their containers until they arrive at static-protected workstations.
l Place parts in a static-protected area before removing them from their containers.
l Avoid touching pins, leads, or circuitry.
l Always be properly grounded when touching a static-sensitive component or assembly.
l Remove clutter (plastic, vinyl, foam) from the static-protected workstation.
QX and QXS Setup Guide 196

Quantum QX Series Specifications

General

Brand	Quantum
Model	QX Series
Category	Storage
Language	English