To Next Page

To Previous Page

LTE Standard Module Series

EC200T Series Hardware Design

EC200T_Series_Hardware_Design 10 / 90

❒ WCDMA Band II/LTE Band2/ LTE Band 7 :≤8.000dBi

❒ WCDMA Band IV/ LTE Band 4 / LTE Band 66:≤5.000dBi

❒ WCDMA Band V / LTE Band 5:≤9.541dBi

5. This module must not transmit simultaneously with any other antenna or transmitter

6. The host end product must include a user manual that clearly defines operating requirements and

conditions that must be observed to ensure compliance with current FCC RF exposure guidelines.

For portable devices, in addition to the conditions 3 through 6 described above, a separate approval is

required to satisfy the SAR requirements of FCC Part 2.1093

If the device is used for other equipment that separate approval is required for all other operating

configurations, including portable configurations with respect to 2.1093 and different antenna

configurations.

For this device, OEM integrators must be provided with labeling instructions of finished products.

Please refer to KDB784748 D01 v07, section 8. Page 6/7 last two paragraphs:

A certified modular has the option to use a permanently affixed label, or an electronic label. For a

permanently affixed label, the module must be labeled with an FCC ID - Section 2.926 (see 2.2

Certification (labeling requirements) above). The OEM manual must provide clear instructions

explaining to the OEM the labeling requirements, options and OEM user manual instructions that are

required (see next paragraph).

For a host using a certified modular with a standard fixed label, if (1) the module’s FCC ID is not visible

when installed in the host, or (2) if the host is marketed so that end users do not have straightforward

commonly used methods for access to remove the module so that the FCC ID of the module is visible;

then an additional permanent label referring to the enclosed module:“Contains Transmitter Module FCC

ID: XMR202011EC200TAU” or “Contains FCC ID: XMR202011EC200TAU” must be used. The host

OEM user manual must also contain clear instructions on how end users can find and/or access the

module and the FCC ID.

Quectel EC200T Series User Manual

Questions and Answers: