LTE Standard Module Series
EC200T Series Hardware Design
EC200T_Series_Hardware_Design 83 / 90
DCS1800 TBD NA NA -102 dBm
DCS1900 TBD NA NA -102 dBm
WCDMA B1 TBD NA NA -106.7 dBm
WCDMA B2 TBD NA NA -104.7 dBm
WCDMA B4 TBD NA NA -106.7 dBm
WCDMA B5 TBD NA NA -104.7 dBm
WCDMA B8 TBD NA NA -103.7 dBm
LTE-FDD B1 (10 MHz) TBD TBD TBD -96.3 dBm
LTE-FDD B2 (10 MHz) TBD TBD TBD -94.3 dBm
LTE-FDD B3 (10 MHz) TBD TBD TBD -93.3 dBm
LTE-FDD B4 (10 MHz) TBD TBD TBD -96.3 dBm
LTE-FDD B5 (10 MHz) TBD TBD TBD -94.3 dBm
LTE-FDD B7 (10 MHz) TBD TBD TBD -94.3 dBm
LTE-FDD B8 (10 MHz) TBD TBD TBD -93.3 dBm
LTE-TDD B28 (10 MHz) TBD TBD TBD -94.8 dBm
LTE-TDD B40 (10 MHz) TBD TBD TBD -96.3 dBm
LTE-TDD B66 (10 MHz) TBD TBD TBD -96.3 dBm
“*” means under development.
5.7. Electrostatic Discharge
The module is not protected against electrostatics discharge (ESD) in general. Consequently, it is subject
to ESD handling precautions that typically apply to ESD sensitive components. Proper ESD handling and
packaging procedures must be applied throughout the processing, handling and operation of any
application that incorporates the module.
NOTE
To Next Page
Loading...
Need help?
General
