7ESP-LX+ & LXi+ Installation, Programming, & Operation Guide
Programming Checklist
To program the ESP-LX+ or LXi+ controller for the first time,
we recommend that you complete the following steps in order.
For your convenience, a check-off box (❐) is provided for each
step.
❐ Fill out Programming Chart .................................................. Page 8
❐ Clear all program information ............................................... Page 10
❐ Set time and date. ................................................................ Page 11
For each program:
)*+,
❐❐❐❐Select program (A, B, C, or D-drip). ... Page 13
❐❐❐❐Set watering day cycle ....................... Page 14
❐❐❐❐Set station watering times. ................. Page 19
❐❐❐❐Set program start time(s). ................... Page 21
❐❐❐❐Set water budget (optional). ............... Page 23
❐❐❐❐Set station delays (optional). .............. Page 24
❐ Set master valve / pump starts for each station (optional). . Page 26
❐ Set rain delay (optional). ...................................................... Page 28
❐ Set calendar day(s) OFF (optional). ..................................... Page 29
❐ Set sensor system and bypass switch (optional). ............... Page 31
❐ Set controller to automatic operation. ................................. Page 33
❐ Run test program (optional). ................................................. Page 36
To Next Page
Loading...
Need help?
General
