65ESP-LX+ & LXi+ Installation, Programming, & Operation Guide
TROUBLESHOOTING
SYMPTOM POSSIBLE CAUSE SOLUTION
Program does not come
on automatically.
1.
Dial is set to OFF position. Set the dial to AUTO.
2.
Start time has not been entered for the
program.
Turn the dial to PROGRAM START TIMES and check
the start times entered for the program. If the start
time is missing, enter it as described on page 21.
3.
Rain Delay feature is preventing watering.
(Display shows RAIN DELAY and DAYS
REMAINING.)
If the Rain Delay feature has been set properly, no
correction is needed. To cancel the Rain Delay, see
page 28.
4.
Today may not be a watering day for the
program. (Display shows DAYS REMAINING
to the next watering day.)
Press the PGM button to check the days remaining
until the next watering day for each program.
5.
Day Off feature is preventing watering.
(Display shows NON, followed by the time of
day.)
If the Day Off feature has been set properly, no
correction is needed. To run a program manually
(even on a Day Off), see page 34. To change the
Day Off feature, see page 29.
6.
Programs Water Budget is set to 0%. Set the Water Budget above 0%. See page 23.
To Next Page
Loading...
