18 ESP-LX+ & LXi+ Installation, Programming, & Operation Guide
Odd/Even Cycle
To set an odd/even cycle:
➊ Turn the dial to DAY CYCLE.
➋ The display shows the currently selected program. If the
program you want is not displayed, press PGM until it
appears.
➌ Press ñ or ò until ODD or EVEN appears in the
display.
➍ Turn the dial to AUTO.
NOTE: If you do not want to water on the 31st of any
month (a restriction imposed in some local areas), you
must set the 31st day OFF. See page 29 for
instructions.
To Next Page
Loading...
Need help?
General
