16 ESP-LX+ & LXi+ Installation, Programming, & Operation Guide
Cyclical
To set a cyclical schedule:
➊ Turn the dial to DAY CYCLE.
➋ The display shows the currently selected program. If the
program you want is not displayed, press PGM until it
appears.
➌ Press ñ or ò until CYCLIC appears in the display.
➍ Press MAN. START/ADV.
➎ The display shows the number of days remaining until a
watering day and the number of days in the cycle. The DAY
CYCLE digit flashes.
➏ Press ñ or ò to set the number of days in the cycle. For
example, if you want to water every other day, set the day
cycle to 2. If you want to water every third day, set the day
cycle to 3.