R&S FPC Series User Manual

Function Reference
R&S
®
FPC
371User Manual 1178.4130.02 ─ 07
Remote command:
Impedance: INPut:IMPedance on page 256
Matching pad:INPut:IMPedance:PAD on page 257
Transducer
See "Selecting transducer factors" on page 105.
Remote command:
Selection: [SENSe:]CORRection:TRANsducer<td>:SELect on page 257
State: [SENSe:]CORRection:TRANsducer<td>[:STATe] on page 258
Query unit: [SENSe:]CORRection:TRANsducer<td>:UNIT? on page 258
20.4.14 Bandwidth Menu
Access: [BW]
RBW: Manual..............................................................................................................371
RBW: Auto...................................................................................................................371
VBW: Manual.............................................................................................................. 371
VBW: Auto...................................................................................................................371
RBW: Manual
See "Setting the resolution bandwidth" on page 107.
Remote command:
[SENSe:]BANDwidth[:RESolution] on page 259
RBW: Auto
See "Setting the resolution bandwidth" on page 107.
Remote command:
[SENSe:]BANDwidth[:RESolution]:AUTO on page 260
VBW: Manual
See "Setting the video bandwidth" on page 109.
Remote command:
[SENSe:]BANDwidth:VIDeo on page 260
VBW: Auto
See "Setting the video bandwidth" on page 109.
Remote command:
[SENSe:]BANDwidth:VIDeo:AUTO on page 260
20.4.15 Sweep Menu
Access: [Sweep]
Function Reference: Spectrum Application

R&S FPC Series Specifications

General

Brand	R&S
Model	FPC Series
Category	Measuring Instruments
Language	English