R&S FPC Series User Manual

Function Reference
R&S
®
FPC
372User Manual 1178.4130.02 ─ 07
Continuous Sweep......................................................................................................372
Single Sweep.............................................................................................................. 372
Sweep Time: Auto.......................................................................................................372
Sweep Time: Manual...................................................................................................372
Trigger.........................................................................................................................372
Continuous Sweep
See "Selecting the sweep mode" on page 111.
Remote command:
Sweep mode: INITiate:CONTinuous on page 262
Start sweep: INITiate[:IMMediate] on page 263
Single Sweep
See "Selecting the sweep mode" on page 111.
Remote command:
Sweep mode: INITiate:CONTinuous on page 262
Start sweep: INITiate[:IMMediate] on page 263
Sweep Time: Auto
See "Defining the sweep time" on page 110.
Remote command:
[SENSe:]SWEep:TIME:AUTO on page 262
Sweep Time: Manual
See "Defining the sweep time" on page 110.
Remote command:
[SENSe:]SWEep:TIME on page 261
Trigger
See "Selecting the trigger source" on page 112 and "Defining a trigger delay"
on page 113.
Remote command:
Trigger source: TRIGger[:SEQuence]:SOURce on page 265
Trigger level (video): TRIGger[:SEQuence]:LEVel:VIDeo on page 264
Trigger slope (external): TRIGger[:SEQuence]:SLOPe on page 264
Delay (external): TRIGger[:SEQuence]:HOLDoff[:TIME] on page 264
20.4.16 Trace Menu
Access: [Trace]
Select Trace................................................................................................................ 373
Trace Mode................................................................................................................. 373
Detector.......................................................................................................................373
Memory Traces........................................................................................................... 373
Trace Math.................................................................................................................. 373
Function Reference: Spectrum Application

R&S FPC Series Specifications

General

Brand	R&S
Model	FPC Series
Category	Measuring Instruments
Language	English