To Next Page

To Previous Page

Instrument functions

R&S

LCX Series

70User Manual 1179.2260.02 ─ 02

How to: see Chapter 8.2.2, "Configuring the main view", on page 70.

<measurement pair>.....................................................................................................70

<measurement accuracy>.............................................................................................70

Selects the measurement parameters.

Depending on the type of component sample, the R&S LCX adjusts the list of parame-

ters automatically.

Remote command:

FUNCtion:IMPedance[:TYPE] on page 197

The test signal monitor indicates accuracy of the recent measurement.

Remote command:

MEASure:ACCuracy? on page 207

8.2.2 Configuring the main view

Selecting the parameters for display

To select the measurement parameters in the numeric view:

1. At the front panel, press the [home] key.

2. Select the parameter pair softkey in the upper left corner of the screen, to open the

selection editor.

3. Select the corresponding measurement pair.

4. Confirm the selection.

5. Select the second measurement pair accordingly.

8.3 Measurement functions

The hardkeys provided in the function panel at the front select the measurement com-

ponent type.

Functions [hardkeys].....................................................................................................70

Functions [hardkeys]

Selects the type of component sample to be measured.

Remote command:

FUNCtion:MEASurement:TYPE on page 198

Measurement functions

R&S LCX Series User Manual

Other manuals for R&S LCX Series